Charging generator AG SL

 

The output of the low-priced charging generator AG SL is set by modifying the distance of the electrodes. The AG SL has one high-voltage connection (DC). The output voltage is displayed by means of an analog measuring instrument.

 

HAUG-Charging systems

HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.
All HAUG charging generators are available with positive or negative polarity.

Applications

HAUG charging systems can be used, among others, in the following applications:

  • for fixing and positioning films and foils, paper and cardboard, e.g. on steel sheets, glass panels, wood panels or similar;
  • for fixing films and foils on packaging machines / film welding machines;
  • for fixing films and foils on turrent film winders, for fixing the wound film against telescoping and glue-less commencement of the film winding process on cardboard tubes.


Technical data AG SL / AG 25

Dimensions 269 x 168 x 150 mm (L x W x H)
Protection Type IP 54
Protection class I
Supply voltage 115 VAC / 230 VAC (50 – 60 Hz)
Power consumption approx. 50 VA
Output-voltage
charging
approx. 25 kVDC
Short-circuit output current
charging
(lk) ≤ 1,1 mA
HV-terminals charging 1
Operating temperature +5 °C to +45 °C
Storage/transport temperature -15 °C to +60 °C
Weight 7 kg
Mains cable 2,6 m; fixed to the device

Subject to technical changes!



Download attachments: brochure operating instructions