Ionizing unit IB
HAUG’s Ion-Air blower IB is based on the concept of a proven ionization technique. Negative and positive ions are added to the air flow produced by a cross-flow blower. The air flow hence becomes conductive and is able to eliminate electrostatic surface charges on non-conductive material.
Low operating costs
The Ion-Air blower operates on a low pressure principle and does not require costly compressed air. The power supply, which is required to feed the ionzing bar with high voltage, also operates on a low energy consumption level. This makes the Ion-Air blower a very efficient ionizing system, especially for applications where constant ionization is required.
Applications
- on winding and unwinding systems (especially films and foil)
- on injection moulds and their handling systems
- in the production of circuit boards
- in the electronic industry
- in the plastics and packaging industry
Increasing the effective length
The Ion-Air blower becomes very flexible when a larger operating length is required. Several units can be “daisy-chained” in series. In this case, only one ionizing bar and one power pack is required (other lengths are also available on request).
Technical data
Type | BI | Order-No.: 12.0006.000 |
Diameter | 20 mm | |
Length | from 100 mm | |
Operating temperature | +5°C to +45°C | |
Storage/transport temperature | -15°C to +60°C | |
Optimum effective distance | 2 - 3 mm | |
Effective length | bar length - 50 mm |
Subject to technical changes!
Accessories
Bar holder ”Klick Zack” | Order-No.: 10.0004.000 | |
Bar holder, bloc, half open | Order-No.: 10.0301.000 | |
Bar holder | Order-No.: 10.0227.000 | |
Clamping holder, 2 parts | Order-No.: 10.0268.000 | |
Angle, large | Order-No.: X-0404 |
Download attachments: brochure operating instructions