Ionizing unit WXC 2

 

The Web Cleaner 2 WXC 2 is used for contact-free cleaning with simultaneous extraction of visible dust and smaller particles. Cleaning and elimination of electrostatic charges from material webs in the same process by using ionized compressed air. The integrated extractor ensures an optimum and residue-free degree of surface cleaning.

 

Combination with ionizing bars

The following ionizing bars can be combined with the Web Cleaner housing:

  • Ionizing bar EI RN
  • Ionizing bar EI RD
  • Ionizing bar EI VS
  • Ionizing bar EI Ex T (for potentially explosive areas)

 

Compressed air

Compressed air of a quality suitable for spraying applications must be available, i.e. it must be free of oil and water. The upstream installation of a service unit with integrated oil and water separator is recommended.

Air consumption

Air consumption in Nm³/h has a function of extraction width and operating pressure

Web speeds

The maximum web speed of the standard version is approx. 80 m/min. Higher speeds are available on request.

Pulsed operation

The application of Statik-Air systems in pulsed operation can be recommended for media transported with intermediate distances/gaps.
Advantage: reduced costs (e.g. for compressed air). Pulsed operation can be controlled by external input to the switchgear, e.g. using photoelectric sensors, proximity switches or other potential-free contacts.

Continuous operation

The application of Statik-Air systems in continuous operation can be recommended if the medium to be cleaned passes through continuously.

Switchgear

The switchgear is equipped with three functional modules:

  • Power supply with power circuit breaker, motor circuit breaker foe extractor dan, On/Off switch and control lamps. Should it be necessary to connect two extractor fans to one switchgear, the relevant versions can also be supplied.
  • Solenoid valve for compressed air control with time-delay switch for pulsed operation.
  • High-voltage power pack with 4 high-voltage terminals. The watchdog integrated in the secondary area signals a drop below the corona inception voltage.


Applications

Plastics, furniture, paper, print, film, foil, automotive, electrical and other industries.The Web Cleaner 2 WXC 2 is used for contact-free cleaning with simultaneous extraction of visible dust and smaller particles. Cleaning and elimination of electrostatic charges from material webs in the same process by using ionized compressed air. The integrated extractor ensures an optimum and residue-free degree of surface cleaning.

 

Combination with ionizing bars

The following ionizing bars can be combined with the Web Cleaner housing:

  • Ionizing bar EI RN
  • Ionizing bar EI RD
  • Ionizing bar EI VS
  • Ionizing bar EI Ex T (for potentially explosive areas)

 

Compressed air

Compressed air of a quality suitable for spraying applications must be available, i.e. it must be free of oil and water. The upstream installation of a service unit with integrated oil and water separator is recommended.

Air consumption

Air consumption in Nm³/h has a function of extraction width and operating pressure

Web speeds

The maximum web speed of the standard version is approx. 80 m/min. Higher speeds are available on request.

Pulsed operation

The application of Statik-Air systems in pulsed operation can be recommended for media transported with intermediate distances/gaps.
Advantage: reduced costs (e.g. for compressed air). Pulsed operation can be controlled by external input to the switchgear, e.g. using photoelectric sensors, proximity switches or other potential-free contacts.

Continuous operation

The application of Statik-Air systems in continuous operation can be recommended if the medium to be cleaned passes through continuously.

Switchgear

The switchgear is equipped with three functional modules:

  • Power supply with power circuit breaker, motor circuit breaker foe extractor dan, On/Off switch and control lamps. Should it be necessary to connect two extractor fans to one switchgear, the relevant versions can also be supplied.
  • Solenoid valve for compressed air control with time-delay switch for pulsed operation.
  • High-voltage power pack with 4 high-voltage terminals. The watchdog integrated in the secondary area signals a drop below the corona inception voltage.


Applications

Plastics, furniture, paper, print, film, foil, automotive, electrical and other industries.The Web Cleaner 2 WXC 2 is used for contact-free cleaning with simultaneous extraction of visible dust and smaller particles. Cleaning and elimination of electrostatic charges from material webs in the same process by using ionized compressed air. The integrated extractor ensures an optimum and residue-free degree of surface cleaning.

 

Combination with ionizing bars

The following ionizing bars can be combined with the Web Cleaner housing:

  • Ionizing bar EI RN
  • Ionizing bar EI RD
  • Ionizing bar EI VS
  • Ionizing bar EI Ex T (for potentially explosive areas)

 

Compressed air

Compressed air of a quality suitable for spraying applications must be available, i.e. it must be free of oil and water. The upstream installation of a service unit with integrated oil and water separator is recommended.

Air consumption

Air consumption in Nm³/h has a function of extraction width and operating pressure

Web speeds

The maximum web speed of the standard version is approx. 80 m/min. Higher speeds are available on request.

Pulsed operation

The application of Statik-Air systems in pulsed operation can be recommended for media transported with intermediate distances/gaps.
Advantage: reduced costs (e.g. for compressed air). Pulsed operation can be controlled by external input to the switchgear, e.g. using photoelectric sensors, proximity switches or other potential-free contacts.

Continuous operation

The application of Statik-Air systems in continuous operation can be recommended if the medium to be cleaned passes through continuously.

Switchgear

The switchgear is equipped with three functional modules:

  • Power supply with power circuit breaker, motor circuit breaker foe extractor dan, On/Off switch and control lamps. Should it be necessary to connect two extractor fans to one switchgear, the relevant versions can also be supplied.
  • Solenoid valve for compressed air control with time-delay switch for pulsed operation.
  • High-voltage power pack with 4 high-voltage terminals. The watchdog integrated in the secondary area signals a drop below the corona inception voltage.


Applications

Plastics, furniture, paper, print, film, foil, automotive, electrical and other industries.

 

Technical data Web Cleaner 2

Type WXC 2 Order-No.: 04.0100.000
Dimensions 185 x 85 mm
Lengths 70 to 2000 mm (greater lengths on request)
Weight approx. 17 kg/m
Cable outgoing available right or left
Operating temperature +5 °C to +45 °C
Storage/transport temperature -15 °C to +60 °C
Smallest bending radius (cable) R 50

Subject to technical changes!

Accessories

Compressed-air hose
Ø 12 x 9 mm
Order-No.: X-6616
Radial fan Order-No.: X-1516
Filter control valve Order-No.: 11.7210.001

Download attachments: brochure operating instructions