Ionizing unit EI RN

 

The HAUG EI RN ionizing bar is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively – even at high operating speeds.

 

The coaxial high-voltage plug-and-socket connection of the HAUG systemX-2000 offers a unique advantage in that the gastight high-voltage plug can be connected to the HAUG power pack easily and without tools. The flexible, coaxially shielded cable connects the ionizing unit with the voltage supply.
The round construction of the EI RN ionizing bar permits the exact axial adjustment in the direction of travel of the material. The ionizing bar is safe to touch. Special wear-resistant electrodes guarantee long service life.

Further bar types are available

  • EI RNE as EI RN, but with high-voltage connection at the end of the bar for series connection of ionizing units.
  • EI RA without HV-cable, suitable for connection of a flexible, separate high-voltage cable (type VK-Norm, VK-ATL a.o.)
  • EI RAE, as EI RA but with high-voltage connection at the end of the bar for series connection of ionizing units.


Recommendation

HAUG ionizing bars are used with machines in the packaging, film, printing and textile industries, as well as for many other industrial applications. It is recommended that two ionizing bars be installed above and below the material web.
The ionizing bar EI RN is suitable for feed speeds ≤ 100 m/min.

Technical data

Types EI RN TPE
inseparable HV-cable,
attached permanently
to the bar
Order-No.: 03.8505.000
HV-cable Order-No.: 06.0240.000
EI RNE TPE
detachable HV-cable
for series connection
of ionizing units
Order-No.: 03.8507.000
EI RA
for connection of
a highly flexible,
detachable HV-connection cable
Order-No.: 03.8006.000
VK-Norm 21 TPE
VK-Norm 22 TPE
VK-Norm 23 TPE
VK-Norm 24 TPE
Order-No.: 02.8591.000
Order-No.: 02.8592.000
Order-No.: 02.8593.000
Order-No.: 02.8594.000
EI RAE
as EI RA, for series
connection of ionizing units
Order-No.: 03.8008.000
Diameter 18 mm /20 mm
Length from 150 to 4.500 mm lieferbar.
Other lengths on request.
Operating temperature +5°C to +45°C
Storage/transport temperature -15°C to +60°C
Optimum effective distance 20 – 30 mm
Effective length Bar length - 100 mm
Smallest bending radius (cable) R 50

Subject to technical changes!

Accessories

Bar holder ”Klick Zack” Order-No.: 10.0004.000
Bar holder, bloc, half open Order-No.: 10.0301.000
Bar holder Order-No.: 10.0227.000
Clamping holder, 2 parts Order-No.: 10.0268.000
Angle, large Order-No.: X-0404



Suitable Power packs

Connectable lengths
(ionizing unit incl.
high-voltage cable)
EN SL max. 5 m
EN SL LC / EN SL RLC max. 10 m
EN 8 / EN 8 LC max. 18 m
Multistat max. 18 m
EN 70 / EN 70 LC max. 2 x 18 m